Worx WG206E Wartungshandbuch PDF herunterladen (Seite 11)

1110

Hedge trimmer EN

1110

5. Remove the plug from mains before

passing the hedge trimmer to another

person.

6. Avoid operating while people especially

children are nearby.

7. Whilst using the Hedge trimmer always

be sure of a safe and secure operating

position.

8. Keep hands and feet away from the cutting

means at all times and especially when

switching on the motor.

9. Do not use step ladders whilst operating

the Hedge trimmer.

10. Remove the plug from the mains:

Before leaving the Hedge trimmer

unattended for any period,

Before cleaning a blockage,

Before checking, cleaning or working on

the appliance,

If you hit an object, do not use your Hedge

trimmer until you are sure that the entire

Hedge trimmer is in a safe operating

condition,

If the Hedge trimmer starts to vibrate

abnormally, check immediately. Excessive

vibration can cause injury before passing

to another person.

11. Do not expose to rain. Do not operate your

Hedge trimmer on a wet hedge.

12. Always ensure the hand guard supplied

is ﬁtted before using the Hedge trimmer.

Never attempt to use an incomplete

machine or one ﬁtted with an unauthorised

modiﬁcation.

13. Check cutting blades regularly for damage,

and if damaged repair immediately.

14. Keep cable away from the cutting area,

check the cable for damage before starting

work.

15. Do not start the Hedge trimmer with the

blade cover ﬁtted.

16. Take care not to overload the Hedge

trimmer and do not use it on jobs for which

it is not intended, i.e. you are allowed to

use the Hedge trimmer only to cut hedges,

shrubs and perennials.

17. Always be sure of your footing when using

steps and when using your hedge trimmer.

18. Never run when using your hedge trimmer.

19. Heavy duty gloves should always be worn

when using the Hedge trimmer.

20. Be careful during adjustment of placing

your ﬁngers between moving blades and

ﬁxed parts of the machine

21. During transportation and storage of the

Hedge trimmer, keep the blades covered at

all times with the blade cover/storage.

22. The use of a Residual Current Device

(R.C.D.) with a tripping current of not more

than 30mA is recommended.

23. Do not try to grasp or remove hedge

clippings when the hedge trimmer is

running. Only remove hedge clippings

when the appliance is switched off and

disconnected from the mains supply.

24. Carry the hedge trimmer at the handle

while the cutter blade is not running.

Always ensure guard supplied is ﬁtted

when transporting or storing the hedge

trimmer. Careful operation reduces the

injury by the cuter blade.

25. Keep cable away from the cutting area. Be

aware that during operation the cable may

be covered in hedge clippings and could be

cut inadvertently.

26. If the supply cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarly qualiﬁed persons in

order to avoid a hazard.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare